GE Multilin 489 Instruction Manual page 14

1–4
Courtesy of NationalSwitchgear.com
b. General counters such as number of breaker operations and number of thermal
resets.
c. Generator hours online timer.
5. Event recorder downloading tool.
6. Product information including model number, firmware version, additional product
information, and calibration dates.
7. Oscillography and data logger downloading tool.
Alarm, trip conditions, diagnostics, and system flash messages are grouped under Target
Messages.
Press the
displayed in the following sequence:
To access setpoints,
press the
menu.
Press the
setpoints page.
The setpoint pages are numbered, have an 'S' prefix for easy
identification and have a name which provides a general idea of the
settings available in that page.
Press the
available setpoint page headers.
Setpoint page headers look as follows:
To enter a given setpoints page,
Press the
Press the
headers until the required message is reached.
The end of a page is indicated by the message
beginning of a page is indicated by the message
To access actual values,
CHAPTER 1: GETTING STARTED
key to access the header of each menu, which will be
MENU
SETPOINTS
ACTUAL VALUES
TARGET MESSAGES [ ]
key until the display shows the header of the setpoints
MENU
or key to display the header for the first
MESSAGE ENTER
and
MESSAGE MESSAGE
SETPOINTS
S1 489 SETUP
or key.
MESSAGE ENTER
or
MESSAGE MESSAGE
489 GENERATOR MANAGEMENT RELAY – INSTRUCTION MANUAL
[ ]
[ ]
keys to scroll through all the
[ ]
keys to scroll through sub-page
. The
END OF PAGE
.
TOP OF PAGE