Heat-Storage Stone - SCAN 68-2 Assembly And Instruction Manual

1
Scan 58 Vægforankringshuller inde i high top
NAVN: EMNE:
MATERIALE:
DIMENSION:
C:\Working Folder\Designs\Scan 58\90358166.idw
STI:

HEAT-STORAGE STONE

Heat-storage stones are made from a special material with a high heating capacity. The stones are heated up during the firing
and gives off the heat again after the firing, which means that the stove stays warm for a longer time.
Firing with the vent open will give a quicker heating. Firing with the vent closed will extend the heating time of the stove.
forankring begud
Scan 68
NAVN: EMNE:
The heat accumulating stones
are placed in the high top and
MATERIALE:
turned in place around the
DIMENSION:
chimney
C:\Working Folder\Designs\90068124.idw
STI:
32
Fixing hole for fastening the safety wire in the high top
with rear outlet. (1)
Fixing hole for fastening the safety wire in the high top
with elbow pipe. (2)
TG.NR: 90358166
N/A 18-02-11 BC
VÆGT: DATO: SIGN:
N/A
AREAL: Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
(ACCESSORY)
1
The second stone is placed next
Scan 68
NAVN:
N/A to the first stone so that they join
VÆGT: DATO: 07-09-2015
MATERIALE:
each other around the chimney
N/A
AREAL: Krog Iversen & Co A/S
DIMENSION:
DK-5492 Vissenbjerg©
C:\Working Folder\Designs\Scan 68\90068125.idw
STI:
2
TG.NR: 90068124
forankring knækrør
EMNE:
hms
SIGN:
VÆGT:
N/A
AREAL:
2
The rest of the stones are
TG.NR: 90068125
placed in the same way
N/A hms
DATO: 07-09-2015 SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
3
3