Fitting A Storage Door - SCAN 58-2 Assembly And Instruction Manual

Fitting a storage door

You can buy a storage door for the Scan 58 with "see through" plinth
as an accessory. Fit this as shown below.
1. Remove the door.
2. Put the bottom plate in position.
A S S E M B LY
3. Fit the rear plate via slots in the stove and holes in the bottom
plate.
F
Slot in the stove
4. Fit the brackets and hook the door on (top left corner first).
F
G
G
Holes in the bottom plate
Magnet for door
5 x Allen screws M4x10
11