SCAN 60 Instructions For Installation And Use

Hide thumbs Also See for 60:

Download this manual

I N S T R U C T I O N S

I N S T A L L A T I O N

SCAN 60

Approuved according to EN 13240 2003

This manual is accompanied by a pamphlet with

General Instructions for Installation.

A N D

Declaration of Conformity

Manufacturer:

Krog Iversen & Co. A/S

DK - 5492 Vissenbjerg

Product:

SCAN 60

Description of product:

Room heater for closed operation

This product complies with the requirements

of the directive

CPD 89/106/EEC

Applied to harmonized standard EN 13240

Signature: _____________________________

Managing director Henning Krog Iversen

Edition 09.06 - GB

F O R

U S E

Need help?

Do you have a question about the 60 and is the answer not in the manual?

Page 1 I N S T R U C T I O N S F O R I N S T A L L A T I O N A N D U S E SCAN 60 Declaration of Conformity Manufacturer: Krog Iversen & Co. A/S DK - 5492 Vissenbjerg...
Page 2 Lift up the lower ceramic smoke deflector, pull out the Clean combustion pins in the lateral combustion chamber plates and The SCAN 60 uses the "CB technique" (Clean-Burn) to remove the deflector. The upper deflector is removed in ensure an optimally clean combustion. The extra combu- the same way.
Page 3 SCAN 60 Accessories Connecting piece For this model you can have the follo- The connecting piece is prepared for top outlet at wing accessories: the factory. Proceed as follows for rear outlet: • Large grill Remove the steel top plate from the stove.
Page 4 SCAN 60 Warranty conditions Technical info All SCAN wood-burning stoves and inserts are made of first- class material and are subject to a strict quality control before Emission (% CO at 13% O 2 ): 0.07% they leave the factory. However, if an error should occur, we...