Page 1
UK - ASSEMBLY AND INSTRUCTIONS MANUAL SCAN 68 ASSEMBLY AND INSTRUCTIONS MANUAL SCAN 68...
Page 2
CONGRATULATIONS ON YOUR NEW SCAN WOOD-BURNING STOVE You have purchased a product by one of Europe’s leading manufacturers of wood-burning stoves, and we are sure that you will have years of pleasure from your purchase. To make the best possible use of your stove, it is important that you follow our advice and instructions.
Page 3
Pedestal Portal Steel sides With side windows With side windows Without side windows Aluminium mouldings Aluminium mouldings Aluminium mouldings SCAN 68-13 LB SCAN 68-15 LB Low Base Low Base Without side windows Soapstone Black mouldings Without side windows Black mouldings...
Mounting of external air supply on the wall fitting Positioning your wood-burning stove Distance to furniture Mounting of high top Safety distance Wall mounting kit for Scan 68 with high top Distance to flammable materials Heat-storage stone Distance to firewall ¬...
Any changes made to the product by the dealer, fitter or user could result in the product and safety functions not functioning as intended. The same applies to the fitting of accessories or extra equipment not supplied by Scan A/S. This could also be the case if parts that are necessary for the operation and safety of the stove are dismantled or removed.
250*** DIMENSION SCAN 68-2, 68-7 AND 68-8 (WALL HUNG MODEL) Centre rear outlet Scan 68 Målskitse wall NAVN: EMNE: Height to the beginning of the MATERIALE: VÆGT: connecting piece at top outlet DIMENSION: AREAL: Centre of fresh air intake C:\Working Folder\Designs\Scan 68\90068004.idw...
Page 8
250*** DIMENSION SKETCH SCAN 68-11 AND 68-12 (PORTAL) Scan 68 Målskitse Portal NAVN: EMNE: MATERIALE: VÆGT: DIMENSION: AREAL: C:\Working Folder\Designs\Scan 68\90068001.idw STI: Centre rear outlet Height to the beginning of the connecting piece at top outlet Centre of fresh air intake...
Page 9
250*** DIMENSION SKETCH SCAN 68-13 LB (LOW BASE) Centre rear outlet Height to the beginning of the Stove: connecting piece at top outlet Name: Date: Constr Material: Centre of fresh air intake 108,41 kg Weight: Articlenumber: Area: All measurements are in millimeters C:\Working Folder\Designs\Scan 68\90068155.idw...
Page 10
250*** DIMENSION SKETCH SCAN 68-13 AND 68-14 HT (HIGH TOP) Scan 68 NAVN: EMNE: MATERIALE: VÆGT: DIMENSION: AREAL: C:\Working Folder\Designs\Scan 68\90068080.idw STI: Centre rear outlet Height to the beginning of the connecting piece at top outlet Centre of fresh air intake...
Page 11
250*** DIMENSION SKETCH SCAN 68-15 LB (SOAPSTONE + LOW BASE) Centre rear outlet Height to the beginning of the Stove: connecting piece at top outlet Name: Date: Const Material: Centre of fresh air intake 108,41 kg Weight: Articlenumber: Area: All measurements are in millimeters C:\Working Folder\Designs\Scan 68\90068155.idw...
TYPE PLATE All Scan wood-burning stoves are fitted with a type plate that specifies the approval standards and the distance to flammable materials. The type plate is located at the rear of the stove. Typeplates...
PRODUCT REGISTRATION NUMBER All Scan wood-burning stoves are provided with a product registration number. You will always need to quote this number when contacting your dealer or Scan A/S. The product registration number is located at the rear of the stove.
National and local building regulations must be followed with regard to connection of a fresh air intake. NOTE: WHEN CONNECTING THE SCAN 68 LOW BASE WITH A FRESH AIR INLET, WE RECOMMEND THAT YOU USE A SHORT, 158962 ANGLED CONNECTION PIECE BECAUSE OF THE LIMITED SPACE IN THE BASE.
EXISTING CHIMNEY AND PRE-FABRICATED ELEMENT CHIMNEY If you intend to connect your stove to an existing chimney, it makes sense to contact an authorised Scan dealer, or a local chim- ney sweep, for advice. These experts will also let you know if your chimney needs renovating.
Your local Scan dealer can advise you on regulations concerning protection of flammable materials in the vicinity of your stove. The floor plate’s function is to protect the floor and flammable material against any sparks that may occur. A floor plate can be made of steel or glass, but the stove can also be erected on clinker concrete, natural stone or similar materials.
, SHOWN WITH UN-INSULATED FLUE PIPE DISTANCE TO FLAMMABLE MATERIALS 45° Corner installation Parallel rear wall installation A: 100 mm A: 449 mm A: 317 mm A: 650 mm A: 650 mm A: 400 mm B: 350 mm B: 802 mm B: 567 mm B: 750 mm B: 750 mm...
DISTANCE TO FIREWALL 110 mm brick, 50 mm JØTUL Firewall or other material with a corresponding insulation ability. The indicated distances are valid for insulated as well as un-insulated smoke pipes. A: 1000 mm A: 600 mm B: 1000 mm *1000/**1000 B: 1200 mm *1100/**1200...
Check that the stove is not damaged before starting to install it. Please remove protection Remove the two screws in the wood compartment and lift the stove off the pallet Scan 58 Scan 58-7 - 10 afmontage ovn på palle NAVN: EMNE: TG.NR: 90358170...
HEIGHT ADJUSTMENT OF STOVE The Scan 68 has four adjustment screws under the stove. Use the adjustment screws and the adjustment key (Accessories) to get the stove to stand straight and level. If the floor plate is used, the stove must be adjusted so that the plate can be placed under the front of the stove.
MOUNTING OF THE STORAGE DOOR FOR THE PORTAL UNIT (ACCESSORY) Dismount the door Remove the four screws under the stove before placing the door assembly Carefully push the door First mount the four Remount the door assembly in from behind screws at the top The 4 outer screws at the bottom are easily tightened Rejust...
There must be a distance of at least 6 mm between the first section and the flange on the flue collar. Please consult a specialist. Scan A/S disclaims all liability for the installation of wall-hung wood-burning stoves. Must be removed, also in the...
Page 26
Use the guide blocks to hold the wall fitting while MATERIALE: VÆGT: adjusting it. DIMENSION: AREAL: 169 mm C:\Working Folder\Designs\Scan 68\90068058.idw STI: Use the line or a spirit level. Drill the necessary holes and mount the screws justeringsskive til vægbeslag justeringsskive til vægbeslag Scan 68...
A ( 1 : 2 ) FITTING NATURAL STONE Scan 68-15 is supplied with loose pieces of natural stone that are fitted to the sides of the stove. Natural stone is made from a natural material and consequently its pattern and shape may vary.
Page 28
(See instructions in this manual) The two screws under the stove must be removed, before lifting the stove up on the wall fitting If you want a rear outlet, see page 20 in this manual mont skruer væghængt Scan 68 90068065 NAVN: EMNE: TG.NR:...
If you choose to connect the stove with an elbow pipe or a rear outlet, the stove must be mounted to the wall behind the oven us- ing a special wall mounting kit. This kit can be purchased from your local Scan dealer. For fitting, see instructions in this manual.
If you choose to connect the stove with an elbow pipe or a rear outlet, the stove must be mounted to the wall behind the oven using a special wall mounting kit. This kit can be purchased from your local Scan dealer.
INSTRUCTIONS FOR USE CB-TECHNOLOGY (CLEAN BURN) The stove is equipped with CB technology. In order to ensure optimal combustion of gases released during the combustion process, air passes through a specially developed system of channels. The heated air is conducted into the combustion chamber through the holes in the rear lining of the combustion chamber and at the baffle plates.
LIGHTING We recommend the use of fire lighters, or similar products, which are available from your Scan dealer. Using fire lighters helps light the wood more quickly and keeps the combustion process clean. See our video about correct firing on www.scan.dk or scan the QR-code. Please note that this...
CONTINUOUS OPERATION It is important to obtain as high a temperature as possible in the combustion chamber. This results in best possible use of the stove and fuel, as well as achieving clean combustion. In this way you will avoid build-up of soot on the combustion chamber lining and glass pane.
GENERAL NOTES PLEASE NOTE! Parts of the wood-burning stove, especially the outer surfaces, become hot during use. Due care should be exercised. ¬ Never empty ashes into a flammable container. Ashes can contain glowing embers long after you finish operating the stove ¬...
HANDLING FUEL SELECTING WOOD/FUEL You can use any type of wood as fuel. However harder woods, such as beech or ash, are generally better for heating, as they burn more evenly and create less ash. Other woods, such as maple, birch and spruce, are excellent alternatives. PREPARATION The best fuel is obtained where the tree has been felled and the wood sawn and split before May 1st.
Page 39
Before cleaning the stove and sweeping the flue pipe and chimney, we recommend removing the baffle plates. Make sure the stove is cold before starting maintenance or repair work. Scan 68 with inspection holes (version 2019) Scan 68 Scan 68 Renselem...
Page 40
CHECKING THE STOVE Scan A/S recommends that you check your stove thoroughly after sweeping/cleaning. Check all visible surfaces for cracks. Check that all joints are tight and that the gaskets are correctly seated. Worn or deformed gaskets should be replaced.
Page 42
Clean your wood-burning stove by wiping it down with a dry, lint-free cloth. If the paint finish gets damaged, you can purchase repair paint in spray form from your Scan dealer. As slight differences in color shade are possible, we recommend you spray a larger area to achieve a natural blend. For best results, apply repair spray when mol færdig...
Page 43
TROUBLESHOOTING SMOKE ESCAPING ¬ Damp wood ¬ Chimney not drawing properly ¬ Chimney is not properly dimensioned for the stove ¬ Check if the smoke gas pipe/chimney are blocked ¬ Is the chimney the right height for its surroundings? ¬ Vacuum in room ¬...
Page 44
You must quote your stove‘s product registration number when you contact us or your authorized Scan dealer with a warranty claim. The warranty covers all parts which in the opinion of Scan A/S require repair or replacement due to manufacturing or construc- tion error The warranty applies to the original purchaser of the product only, and is not transferable (except on prior sale).
Page 45
Open both, secondary and primar air control to mount the screw. Open both, secondary and primar air control to mount the screw. After mounting the UK screw A ( 0,40 : 1 ) After mounting the UK screw Scan 68 skrue uk mont 90068079 NAVN: EMNE: TG.NR:...
Page 48
Product registration number Quote this number at all enquiries Edition: UK 90068500 10056068-P02 SCAN A/S Damsbovej 1 DK-5492 Vissenbjerg www.scan-stoves.com 29.09.2020...