SCAN 68-2 Assembly And Instruction Manual page 40

CHECKING THE STOVE
Scan A/S recommends that you check your stove thoroughly after sweeping/cleaning. Check all visible surfaces for cracks.
Check that all joints are tight and that the gaskets are correctly seated. Worn or deformed gaskets should be replaced.
SERVICING
Apart from having the chimney swept, your wood-burning stove does not require any regular maintenance. However, we do re-
commend servicing at least once every two years. We recommend that the stove is thoroughly serviced at least once every two
years by a qualified fitter. The service should include the following:
¬ Lubricate hinges using copper grease
¬ Check the gaskets. Replace any that are broken or have gone soft
¬ Check the combustion chamber bottom and riddling grate
¬ Check heat-insulating materials
COMBUSTION CHAMBER LINING
Slight cracks can appear in the combustion chamber lining due to moisture or sudden heating/cooling. These cracks have no
influence on the output or lifetime of your stove. However, if the lining starts to crumble and fall out, you must replace it.
The combustion chamber lining is not covered by the warranty.
MOUNTING OF COMBUSTION CHAMBER
¬ 7 skamol plates (1-5b)
5a
Mount skamol plate 2a and 2b
Scan 68 skamol uden sideruder
EMNE:
C:\Working Folder\Designs\Scan 68\90068094.idw
40
¬ 2 screws ¬ 1 baffle plate (6)
7
4a 4b
6
1
3a 3b
5b
2a
2b
N/A
VÆGT: DATO:
N/A
AREAL:
¬ 1 pin for the baffle plate (7)
Mount skamol plate 1 with the 2 screws
2
Mount skamol plate 3a and 3b
90068094
TG.NR:
18-08-2015 hms
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
Scan 68
NAVN:
MATERIALE:
3a 3b
(To be continued on next page)
øverste skamolplade mont.
EMNE:
N/A
VÆGT:
1
3
TG.NR: 90068060
hms
DATO: 13-05-2015
SIGN: