Table of Contents
Advertisement
FLOOR PLATE
If you are placing the stove on a flammable floor, you must comply with the national and local regulations on the size of
any non-flammable subsurface required to cover the floor around the stove.
Your local Scan dealer can advise you on regulations concerning protection of flammable materials in the vicinity of your
stove.
The floor plate's function is to protect the floor and flammable material against any sparks that may occur.
glasgulvplader
Scan 80
Large shaped floor plate in clear or
Name:
Stove:
Material:
smoke-coloured glass for the Scan 80-series
Weight:
Articlenumber:
N/A
C:\Working Folder\Designs\Scan 80\90580030.idw
Path:
HEAT-STORAGE SYSTEM
R ( 1:5 )
Heat-storage stones are made from a special material with a high heat capacity. The stones are heated when the stove is
on, re-releasing heat once it is off. This extends the time over which the stove remains warm.
¬
Firing with the vent open will give a quicker heating. Firing with the vent closed will extend the heating time of the
Spjæld for varmeakkumulerende sten i lukket position
stove.
Trækkes til venstre for at åbne for konvektionshullerne i toppen
og lukke den lagrede varme ud
The heat-storage stones are
placed in the High Top around the
flue pipe as illustrated.
P
Drawing
19-05-2017
Date:
number:
Constructed/Changed by:
jwa
Area:
N/A
SCAN A/S
DK-5492 Vissenbjerg©
Date:
16-05-2017
Constructed/Changed by:
Area:
N/A
SCAN A/S
DK-5492 Vissenbjerg©
Place the High Top over the
Stove:
Scan 80
Name:
heat-storage stones.
Material:
Weight:
Articlenumber:
C:\Working Folder\Designs\Scan 80\90580030.idw
Path:
P-P ( 1 : 7 )
P
90580034
Drawing
90580030
Small floor plate in clear or
number:
jwa
smoke-coloured glass for the Scan 80-series
R ( 1:5 )
glasgulvplader
Date:
Spjæld for varmeakkumulerende sten i lukket position
Trækkes til venstre for at åbne for konvektionshullerne i toppen
Constructed/Changed by:
og lukke den lagrede varme ud
N/A
Area:
N/A
Spjæld for varmeakkumulerende sten i lukket position
Trækkes til venstre for at åbne for konvektionshullerne i toppen
og lukke den lagrede varme ud
R
P
P-P ( 1 : 7 )
P
P
R ( 1:5 )
R ( 1:5 )
Vent for heat-storage stones in
Drawing
16-05-2017
90580030
closed position.
number:
jwa
Spjæld for varmeakkumulerende sten i lukket position
Trækkes til venstre for at åbne for konvektionshullerne i toppen
SCAN A/S
og lukke den lagrede varme ud
DK-5492 Vissenbjerg©
Pull to the left to open the
convection holes in the top
P-P ( 1 : 7 )
and let out the stored heat.
P
P
R
R
P-P ( 1 : 7 )
P
13
Advertisement
Table of Contents
