Mounting Of High Top - SCAN 68-2 Assembly And Instruction Manual

MOUNTING OF HIGH TOP

If you choose to connect the stove with an elbow pipe or a rear outlet, the stove must be mounted to the wall behind the oven us-
ing a special wall mounting kit. This kit can be purchased from your local Scan dealer. For fitting, see instructions in this manual.
IT IS VERY IMPORTANT THAT THE BASE IS LEVEL AND STABLE.
The front plate of the high top is removed as follows:
Remove the Allen screws. Remove the front of the high
top
MOUNTING OF HIGH TOP
A sealing strip, four M5x10 screws with flange and four spacer bushes are supplied.
Fit the four spacer bushes
supplied before fixing the
High Top in place
A ( 1 : 5 )
Top adskilt
EMNE:
Spacer bush
afstandstykker ht kun fedtsten
Scan 68
NAVN: EMNE:
MATERIALE:
DIMENSION: AREAL:
C:\Working Folder\CAD\Inventor 2015\Templates\Standard - Manual.idw
STI:
30
FOR SCAN 68-13/14 HT (ACCESSORY)
FOR SCAN 68-15 NATURAL STONE (ACCESSORY)
1
Use the six screws that are
supplied with the High Top.
(M5 x 10)
NAVN: EMNE: CH unbrako m. flange M5 x 10
MATERIALE: Generic
DIMENSION:
C:\Working Folder\Designs\standardkomponenter\9600163.ipt
STI:
VÆGT:
N/A
AREAL:
TG.NR: 90068142
N/A DATO: 20-10-2015 SIGN: hms
VÆGT:
Scan 68
NAVN:
N/A
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
MATERIALE:
DIMENSION:
C:\Working Folder\CAD\Inventor 2015\Templates\Standard - Manual.idw
STI:
1
Remove the top plate.
Remove the 6 rubber grommets
2
TG.NR: 9600163 NAVN: EMNE: CH unbrako m. flange M5 x 10 TG.NR: 9600163 NAVN: EMNE: CH unbrako m. flange M5 x 10 TG.NR: 9600163
VÆGT: 0,00 kg DATO: 11-12-2014 SIGN: SR MATERIALE: Generic VÆGT: 0,00 kg DATO: 11-12-2014 SIGN: SR MATERIALE: Generic VÆGT: 0,00 kg DATO: 11-12-2014 SIGN: SR
AREAL: 506 mm^2 DIMENSION: AREAL: 506 mm^2 DIMENSION: AREAL: 506 mm^2
Scan A/S Scan A/S Scan A/S
DK-5492 Vissenbjerg© C:\Working Folder\Designs\standardkomponenter\9600163.ipt DK-5492 Vissenbjerg© C:\Working Folder\Designs\standardkomponenter\9600163.ipt DK-5492 Vissenbjerg©
STI: STI:
N/A 09-09-2015
DATO:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
EMNE:
Scan 64 Akselafmaskning GA 0295x050
NAVN: EMNE:
MATERIALE: Silicone
DIMENSION: AREAL: 1104 mm^2
C:\Working Folder\Designs\Scan 68\9914-Scan68-påsat.ipt
STI:
Re-fit the front plate.
Fit the two bottom screws so the front
plate can be pushed in between when it
is mounted.
Re-tighten the two bottom screws
once the front plate is in place
A
90068131
TG.NR:
hms
SIGN:
løft top
VÆGT:
N/A
AREAL:
2
TG.NR: 9914
0,00 kg
VÆGT: DATO: 16-04-2015 SIGN: SR
Scan A/S
DK-5492 Vissenbjerg©
3
N/A 02-09-2
DATO:
Krog Iverse
DK-5492 V