Heat-Storage Stone - SCAN 68 Series Assembly And Instruction Manual

1

HEAT-STORAGE STONE

Heat-storage stones are made from a special material with a high heating capacity. The stones are heated up during the firing
and gives off the heat again after the firing, which means that the stove stays warm for a longer time.
Firing with the vent open will give a quicker heating. Firing with the vent closed will extend the heating time of the stove.
The heat accumulating stones
are placed in the high top and
turned in place around the
chimney
26
Fixing hole for fastening the safety wire in the high top
with rear outlet. (1)
Fixing hole for fastening the safety wire in the high top
with elbow pipe. (2)
(ACCESSORY)
1
The second stone is placed next
to the first stone so that they join
each other around the chimney
2
2
The rest of the stones are
placed in the same way
3
3