Changing The Setting Of The Record Button/Handle Record Button - Sony nxcam HXR-NX3E Operating Manual

Insert a recordable memory card.
Small space
Start
b Notes
• Do not eject the memory card that is currently being used for recording. Replace only the memory card
whose slot lamp is off.
• Even if you press the memory card slot button, A or B, while recording movies, you cannot switch the slot
currently being used.
• When the remaining recording time of the memory card being used is less than 1 minute and the other slot
has recordable memory card inserted, [
indicator turns off when the memory card is switched.
• If you start recording on a memory card with the remaining recording time of less than 1 minute, the
camcorder may not be able to relay-record. To relay-record without fail, make sure that the memory card
has more than 1 minute when you start recording.
• Seamless playback of relay-recorded movies with this camcorder is not possible.
• You can re-combine relay-recorded movies using the application software "Content Browser" (Windows
only).
To record movies using both the memory card A and B (Simultaneous recording)
You can record movies on both of these recording media simultaneously.
Press MENU t select
[SIMULTANEOUS REC] with the SEL/PUSH EXEC dial.

Changing the setting of the record button/handle record button

You can start and stop recording on different recording media at different timing by operating
the record button and the handle record button.
In the default setting, movies are recorded on both the memory card A and B at the same time
when either record button is pressed.
• REC BUTTON:
• HANDLE REC BUTTON:
End
Small space
(REC/OUT SET) t [REC SET] t [SIMUL/RELAY REC] t
REC: Recording
] or [ ] appears on the camcorder screen. The
29
Continued ,