Table of Contents
Advertisement
2-4-2. Connection Connector
Connections made with the connector panels during installa-
tion or service, should be made with the connectors or
complete cable assemblies specified in the following list, or
equivalent parts.
Parts No. and name of connector
Connector Name
with cable
REMOTE
1-506-522-11
CONNECTOR, ROUND 10P, MALE
HIROSE HR 10A-10P-10P equality
(10P, FEMALE)
or CCA-7-20 Cable assembly (optional)
VIDEO OUT
1-560-661-11
(BNC)
PLUG, BNC
VF
9-994-797-01
(8P, FEMALE)
CABLE, VF
LENS
1-564-360-11
CONNECTOR, 12P, MALE
(12P, FEMALE)
HIROSE HR 10-10PA-12P equality
MIC
1-508-084-31
CONNECTOR, 3P, MALE
(3P, FEMALE)
CANNON XLA-3-12C equality
VF
1-778-661-11
CONNECTOR, 20P, MALE
(20P, FEMALE)
HIROSE HR 12-14PA-20PC equality
2-5. HOW TO HANDLE OF AT-110 BOARD
2-5-1. How to Attach of the Extension Board
EX-591
When using the extension board EX-591, attach as follows.
MB-629 board
EX-591 board
AT-110 board
2-5-2. Replacement Way of ROM(IC102)
1.
Slide the IC Socket cover in the A-arrow direction until the
click is heard. Remove the IC socket cover and the former
ROM.
2.
Attach the new ROM on the IC socket.
3.
Place the IC socket cover to have the clearance between
ROM and A-arrow side of IC socket cover. (Refer to
Fig.1.)
4.
Slide the IC Socket cover in the opposite A-arrow direc-
tion with holding the ROM.
AT-110 board
IC108
IC102
2-8
CN2
– With ROM mounted –
A
ROM
IC
IC socket
cover
– How to attach (Fig.1) –
Push
Clearance
A
ROM
IC
IC socket
cover
A
ROM
IC
DXC-D30 (UC)
DXC-D30P (CE)
Advertisement
Table of Contents
