1-6. Judge for No Video Picture Output
FCB/EVI CONTROL INTERFACE TOOL and FLEXIBLE HARNESS 20P are required for easily
determining whether the camera block is faulty or not when a video signal is not output from the unit.
Connection
DD-161/161P board
Color monitor
75 Z termination
AC adaptor
Procedure
1. Turn the switch S001 to ON.
2. The video output picture becomes blue.
3. After 5 seconds, the video output changes from all blue to Full Auto output.
4. If items 2 and 3 are satisfied, camera block is all right.
EVI-D100/EVI-D100P
CN501
FLEXIBLE
HARNESS (20P)
(J-6433-090-A)
S001
Ensure to turn it off
before use.
FCB/EVI CONTROL
INTERFACE TOOL
(J-6432-960-B)
VIDEO OUT
DC IN 9 V (J001)
Use an AC adaptor with
the DC output plug of 4.75 mm
in diameter.
Do not use the AC adaptor
that is supplied with the unit.
This side is contact.
CN501
CN010
This side is blue line.
CN010
1-13