Video Input Connector On Matrox Meteor-Ii /Standard For Pc/104-Plus - Matrox Meteor-II /Standard Installation And Hardware Reference

50 Appendix B: Technical information
Pin
40
41
42
43
44
7, 10, 12, 32,
37, 38
Use Matrox cable DBHD44-TO-13BNC to interface with this connector. The
cable has thirteen BNC connectors, and a high-density 44-pin D-Subminiature
male connector. This cable allows you to attach up to twelve analog video sources,
and a trigger input.
An open-ended version of this cable, the DH44-TO-13BNC/O, is also available
that can be used to access signals in addition to those described above. For
customers planning to build their own cable, parts can be purchased from:
Manufacturer:
Connector & shell:
Video input connector on Matrox Meteor-II /Standard for
1 29
PC/104-Plus
The video input connector on the Meteor-II /Standard for PC/104-Plus is located
2 30
on the top side of the board. Its pinout is as follows:
Pin
2
4
6
8
10
12
14
15
16
17
18
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Signal I/O Description
VID_IN7 I Analog Video Input #7 or C3
VID_IN6 I Analog Video Input #6 or Y3
GND - Ground
VID_IN4 I Analog Video Input #4 or C2
VID_IN2 I Analog Video Input #2 or C1
Not used
Signal I/O
VID_IN1 I
VID_IN2 I
VID_IN3 I
VID_IN4 I
VID_IN5 I
VID_IN6 I
VID_IN7 I
USER(2)_IN I
USER(1)_IN I
USER(2)_OUT O
USER(1)_OUT O
Form Factor
PCI, CompactPCI
PCI, CompactPCI
PCI, CompactPCI
PCI, CompactPCI
PCI, CompactPCI
PCI, CompactPCI
NorComp Interconnect Devices
HDT44P
Description
Analog Video Input #1 or Y1
Analog Video Input #2 or C1
Analog Video Input #3 or Y2
Analog Video Input #4 or C2
Analog Video Input#5 or C4
Analog Video Input #6 or Y3
Analog Video Input #7 or C3
Auxiliary User Input #2
Auxiliary User Input #1
Auxiliary User Output #2
Auxiliary User Output #1