Connecting Matrox Meteor-Ii /Standard For Pci To Other Boards - Matrox Meteor-II /Standard Installation And Hardware Reference

❖ Consult the document provided with your cable for the color-coding of the wires.
Wires Signals
1 VID_IN1
2 VID_IN2
3 VID_IN3
4 VID_IN4
5 VID_IN5
6 VID_IN6
7 VID_IN7
8 VID_IN8
9 VID_IN9
10 VID_IN10
11 VID_IN11
12 VID_IN12
13 VID_IN13
*OPTOTRIG- is usually connected to the ground of the trigger source.
Connect the supplied BNC-TO SVHS adaptor cables to the
DBHD44-TO-13BNC cable for Y/C input. The PCI form factor supports up to
six Y/C sources, and the CompactPCI form factor supports up to three.
Wires on Wires on DBHD44-TO-13BNC
BNC-TO-SVHS
Y 1
C 2

Connecting Matrox Meteor-II /Standard for PCI to other boards

The VMChannel interface allows the transfer of data to other Matrox boards.
Insert a VMChannel backplane (available with the interconnect kit) across the
VMChannel interface to connect the boards. Note that when connecting multiple
Matrox boards, at least one of the boards must be a bus-controller.
Matrox Meteor-II cannot be a bus-controller.
❖ The VMChannel is not supported on the CompactPCI and the PC/104-Plus form
factors.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Connecting external devices
Expected Input
Analog Video Input1 or Y1
Analog Video Input2 or C1
Analog Video Input3 or Y2
Analog Video Input4 or C2
Analog Video Input5 or C4
Analog Video Input6 or Y3
Analog Video Input7 or C3
Analog Video Input8 or Y4
Analog Video Input9 or Y5
Analog Video Input10 or C5
Analog Video Input11or Y6
Analog Video Input12 or C6
External trigger input*
3 6 8 9
4 7 5 10
25
Form factor
PCI, CompactPCI
PCI, CompactPCI
PCI, CompactPCI
PCI, CompactPCI
PCI, CompactPCI
PCI, CompactPCI
PCI, CompactPCI
PCI
PCI
PCI
PCI
PCI
PCI, CompactPCI
Description
11 Luminance
12 Chrominance