Table of Contents
Advertisement
18 Chapter 2: Hardware installation
In some cases, when you boot your computer, Windows' Plug-and-Play system
will detect a new PCI card and you will be asked to assign a driver to it. At this
point, you should click on Cancel because the driver will be installed during the
installation of MIL or one of its derivatives.
Installing Matrox Meteor-II /Standard for CompactPCI
Use the following steps to install your Matrox Meteor-II board for CompactPCI
(3U). Note that a 6U replacement bracket is optional.
1. Remove a plate on the subrack, exposing an empty slot.
2. Carefully position Matrox Meteor-II along one of the guide rails and slide the
board towards the connector at the back.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Subrack
CompactPCI
Board
Guide slots
Advertisement
Table of Contents
Troubleshooting
