What You Need To Get Started - Matrox Meteor-II /Standard Installation And Hardware Reference

10 Chapter 1: Introduction
character recognition (OCR), pattern recognition (Normalized Grayscale
Correlation pattern matching and Geometric Model Finder), edge extraction
(Edge Finder), matrix/bar code reading, and calibration.
MIL-Lite is a subset of MIL. It includes all the MIL commands for image
MIL-Lite
acquisition, transfer, display control, and archiving.
ActiveMIL is a set of ActiveX controls that are based on MIL. ActiveMIL was
ActiveMIL
designed for rapid application development (RAD) tools, such as Microsoft's
Visual Basic. ActiveMIL is included with MIL (ActiveMIL-Lite is included with
MIL-Lite).
Matrox Inspector is an interactive Windows application for image capture,
Matrox Inspector
processing, analysis, and archiving.
MIL application developers can use Matrox Inspector as a prototyping tool to
quickly build proof-of-concept demonstrations for their machine vision, image
analysis, and medical imaging system. End users can use Matrox Inspector to
perform and automate image enhancement and measurement tasks.
Matrox Intellicam is an interactive Windows program that allows fast camera
Matrox Intellicam
interfacing and provides interactive access to all the acquisition features of your
Matrox board. With Matrox Intellicam, you can change the size and position of
the active region by creating a custom DCF. Matrox Intellicam is included with
MIL /ActiveMIL and MIL-Lite /ActiveMIL-Lite.
For more information about Matrox Intellicam, refer to the Matrox Intellicam User
Guide.

What you need to get started

To begin using Matrox Meteor-II /Standard, you need the following:
• A computer with a PCI bus and an Intel Pentium processor (or equivalent) or
better.
• Microsoft Windows if using Matrox Imaging software (consult the
Matrox Imaging software package for specific supported environments and
computer memory/storage requirements).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com