Auxiliary Power Supply Input - Matrox Meteor-II /Standard Installation And Hardware Reference

Pin
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
* N/C = Not connected. This means that the pin is defined as part of the
VMChannel interface standard but it is not used on the
Matrox Meteor-II /Standard board.

Auxiliary power supply input

1
2
The auxiliary power supply input connector is a standard 4-pin male connector
3
4
that routes power from the computer to a camera (via the DB-44). Use the 4-pin
power cable provided with your board to connect to the power supply of your
computer. The operating current is 1.5 A with an auto-resettable fuse. Note that
this input is not available on the CompactPCI and PC/104-Plus form factors.
The pinout of the auxiliary power supply input connector is as follows:
Pin
1
2
3
4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Board input and output connectors
Signal Pin
DATA[10] 52
DGND 53
DATA[13] 54
DATA[14] 55
DGND 56
DATA[17] 57
DATA[18] 58
DGND 59
DATA[21] 60
DATA[22] 61
DGND 62
DATA[25] 63
DATA[26] 64
DGND 65
DATA[29] 66
DATA[30] 67
DGND 68
Description
+5 V
Ground
Ground
+12 V
53
Signal
DATA[11]
DATA[12]
DGND
DATA[15]
DATA[16]
DGND
DATA[19]
DATA[20]
DGND
DATA[23]
DATA[24]
DGND
DATA[27]
DATA[28]
DGND
DATA[31]
SBN