Connecting External Devices; Matrox Meteor-Ii /Standard For Pci - Matrox Meteor-II /Standard Installation And Hardware Reference

Connecting external devices

All form factors of Matrox Meteor-II /Standard have their own particularities
regarding connectors and input devices.

Matrox Meteor-II /Standard for PCI

Matrox Meteor-II /Standard for PCI has five connectors, which are indicated in
the diagram below. Two of these connectors are located on its bracket. The first
four connectors listed are discussed in detail in Appendix B.
• Video input connector. Used to receive analog video, as well as send and receive
synchronization signals and power.
• BNC connector. Used to receive composite analog video.
• Auxiliary power supply input. Used to route power from your computer through
the Matrox Meteor-II board to your camera.
• VMChannel connector. Used to send data to another Matrox board.
• PCI Connector. Used to connect your board to the PCI bus.
Video input
BNC
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Connecting external devices
VMChannel
Auxiliary power supply
input
23
PCI Connector