Table of Contents
Advertisement
10
3
To display the output from Matrox RTMac on your NTSC or PAL video monitor, you
can connect your video monitor to the breakout box or your recorder. For an illustration
of typical composite connections you can use, see
separate source and record devices"
¦ Note You can use a TV in place of an NTSC or PAL video monitor. If your TV has a
TV/VIDEO input switch, set it to VIDEO.
S-Video input/output connections
To connect your S-Video source (for
1
capturing material), use an S-Video
cable, as well as two cables with
RCA connectors for audio.
a
Connect the video output from your
S-Video device to the
jack on the breakout box.
b
Connect the left audio output
channel of your device to the white
L-AUDIO IN
box.
c
Connect the right audio output
channel of your device to the red
AUDIO IN-R
box.
¦ Note If your video device has only one audio connector, use the left audio connector
on the cable.
2
To connect your S-Video recorder, use another S-Video cable and two more cables with
RCA connectors for audio.
a
Connect the
recorder.
b
Connect the white
your video recorder.
Chapter 2, Installing Your RTMac and Connecting Your Devices
on page 12.
S-VIDEO IN
jack on the breakout
jack on the breakout
S-VIDEO OUT
jack on the breakout box to the video input on your video
L-AUDIO OUT
"Composite connections using
Video camera or
player
AUDIO
S-VIDEO
OUT
OUT
L
R
jack on the breakout box to the left audio input of
VIDEO IN
L - AUDIO IN - R
S-VIDEO IN
Advertisement
Table of Contents
