Info Function; Editing A Dictation - Grundig Digta 4015 Manual

Table of Contents

Advertisement

RECORDING

Info function

Editing a dictation

Free 0:37h
vac
DICTOO1
O:17
Record
__________________________________________
You can dictate and mark information for your transcriber as
an integral part of your dictation.
The transcriber can listen to all information separately from the
letter text before starting transcription.
• Press the red recording button » –
button.
– »INFO« appears in the display and the number for the
information (from 01 to 16). This information is trans-
ferred to the PC with the dictation.
When playing back a dictation, you may speak a new text
from the current dictation position, or add a recording to the
end of the dictation.
Note the memory which is available; this is displayed as
»Free -:--h« (in hours and minutes).
• Push the slide switch to »
• Use the up-down button »DICT + _ « to select the desired
dictation.
• Push the slide switch to » START«.
• Press the red recording button » –
dictation is to be changed and start dictation.
– »Record« appears in the display.
• At the end of dictation push the slide switch to
»
STOP«.
• Press the red recording button » –
to »
REW.« or »
– Dictation is switched off.
« and then the »INFO«
DICT
STOP«.
« at the point where the
DICT
« or push the slide switch
DICT
F.FWD«.
19

Advertisement

Table of Contents
loading

Table of Contents