Communication With The Pc; Steno.trans; Stenonet.mail; System Requirements For Steno.trans And Steno.mail - Grundig Digta 4015 Manual

COMMUNICATION WITH THE PC

___________

Steno.trans

The Steno.trans software is used to transfer your dictations to your
PC. You obtain an immediate overview of your work and can also
play-back your dictations on a notebook. For example, transfer
your dictations to a voice recognition system or send Voice Mails
via your mail system.

StenoNet.mail

If your office organization uses the StenoNet digital dictation
system, Digta and the StenoNet.mail software will bring you net-
work mobility.
All addresses of your authors and typists are available for sending
your dictations. You mark your dictations, for example, with the
dictation type, deadline and priority, in order to perfectly organize
your transcription service. If all dictations have the same priority,
you simply plug the USB cable into the Digta. With the simple pres-
sure of a button all dictations are sent to the preselected typist. Your
Digta is immediately free for further dictations.
System requirements for Steno.trans and
StenoNet.mail
Pentium processor (500 MHz or higher)
WIN 98 SE/ME operating systems,
preferably WIN NT4.0/2000/XP
USB 1.1 or 2.0 serial interface
For e-mail connection: MAPI-compatible mail system
(such as Microsoft Outlook)
The Windows NT operating system does not support a USB port.
To be able to use the digital dictation machine with WinNT, you
need the optional "Grundig USB Driver for WinNT".
44