Supply Voltage Battery, Rechargeable Battery, Mains Operation Battery/rechargeable battery condition indi- cator (plus recording indicator): Lights up when recording. Goes out when the batteries/rechargeable bat- teries are weak. Recording is still possible until the motor stops (sound signal). Battery operation with two 1.5V/LR 6/AA bat- teries (alkaline-manganese), leak-proof.
Controls and Sockets Please open folder at beginning of booklet! Playback Volume Control (turn) Microphone Record Indication Lights up during recording. Record Button - Press for recording (locks in). Switch-On Lock red green Prevents accidental switching on. Sliding Switch Fast forward wind (search) Stop Start playback Start recording:...
Page 6
General Do not expose the unit and the steno-cassettes to temperatures above 55 °C. Dispose of old batteries and rechargeable bat- teries according to environmental regulations. *Accessories indicated in the text are not sup- plied with the unit. Switch-On Lock Switch-on lock red green Red visible:...
Page 7
Recording Microphone and Recording Indication Microphone Speaking distance approx. 5cm - 10cm; decrease in the case of high ambient noise. Recording Indication (plus battery/rechargeable battery indicator) – Ligths up during recording. – Goes out when the batteries/rechargeable batteries are exhausted (page 1). Recording Every new recording automatically erases the existing recording on the tape.
Recording To listen to the last words: Release sliding switch ( playback). To listen to long text passages, keep sliding switch in rewind position: – The tape is rewound until the sliding button is released ( plaback). Resuming dictation During playback, press - record button (locks in) at desired text passage: –...
Page 9
Playback Playback Starting playback Set sliding switch to Start: Adjust desired volume (turn). Concluding playback Set sliding switch to Stop. Fast Rewind Keep sliding switch in rewind position; the tape is briefly rewound then stopped: If you wish to listen only to the last words (word repetition), release the sliding button ( playback).
Care and Maintenance The cabinet should only be cleaned with a soft cloth which picks up dust. Polishing or clea- ning agents may damage the surface. Parts contacting the tape should be checked from time to time for contamination by tape abrasion, see illustration at the end of this booklet.
Page 11
Figure to text "tape contacting parts" , page...
Need help?
Do you have a question about the Dh 2094 and is the answer not in the manual?
Questions and answers