Idle Speed Adjusting Screw; Shift Lever - GAS GAS MC 450F 2021 Owner's Manual

6 CONTROLS
6.10
6.11
18

Idle speed adjusting screw

A00884-10

Shift lever

401950-10
401950-13
401950-11
The idle setting of the throttle valve body substantially influences
the vehicle's starting behavior, a stable idle speed, and the vehicle's
response when the throttle is opened.
An engine with a correctly set idle speed is easier to start than an engine
with the idle speed set incorrectly.
The idle speed is adjusted using the idle speed adjusting screw
Increase the idle speed by turning the idle speed adjusting screw clock-
wise.
Decrease the idle speed by turning the idle speed adjusting screw coun-
terclockwise.
1
Shift lever is mounted on the left side of the engine.
(MC)
The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.
(EX)
The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.
1
.