19.2
Putting into operation after storage
Info
Do not use non-porous materials since they prevent humid-
ity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Since the
engine cannot warm up properly, the water vapor produced
during combustion condenses and causes valves and the
exhaust system to rust.
–
Install the 12-V battery.
–
Remove the motorcycle from the lift stand. (
–
Perform checks and maintenance measures when preparing for use.
(
p. 25)
–
Take a test ride.
401059-01
(
p. 93)
p. 44)
STORAGE 19
115