11 SERVICE WORK ON THE CHASSIS
11.5
11.6
11.7
46
Removing the fork protector
A00777-10
Installing the fork protector
A00777-11
Removing the fork legs
–
Press the dust boots back into their installation position.
–
Remove excess oil.
Finishing work
–
Install the fork protector. (
–
Remove the motorcycle from the lift stand. (
–
1
Remove screws
and take off the clamp.
–
2
Remove screws
and take off the left fork protector.
–
3
Remove screws
and take off the right fork protector.
–
Position the fork protector on left fork leg. Mount and tighten
1
screws
.
Guideline
Remaining screws,
chassis
–
Position the brake line and the clamp. Mount and tighten
2
screws
.
Guideline
Screw, brake line
bracket
–
Position the fork protector on the right fork leg. Mount and tighten
3
screws
.
Guideline
Remaining screws,
chassis
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
p. 46)
p. 44)
M6
10 Nm (7.4 lbf ft)
EJOT
1.7 Nm (1.25 lbf ft)
M6
10 Nm (7.4 lbf ft)
p. 44)
(
p. 87)