Keysight Technologies N5991 Getting Started Manual page 41

Using the Software 5
Figure 21 Modifying parameters
Sequence Parameters
The sequencer parameters control the flow of the test sequencer, not the
behavior of individual procedures. They are identical across all versions of
ValiFrame. One of them, Repetitions, is available for all procedures and
groups in the procedure tree. The others are only available for procedures.
Like all other parameters the sequencer parameters are shown on right
side of the ValiFrame user interface and they can be changed by the user
as illustrated in Figure 22.
Keysight N5991 Test Automation Software Platform Getting Started Guide 41