Main Window - Keysight Technologies N5991 Getting Started Manual

Main Window

Keysight N5991 Test Automation Software Platform Getting Started Guide
Once the DUT has been configured, press the OK button in Configure DUT
Panel. Test Automation Software Platform main window is displayed with
the procedure tree as shown in
and test procedures, typically in the following groups:
• Calibration
• Receiver tests
Figure 20 Main Window (Example for PCIe)
On the top, the menu buttons allow to perform the main actions such as
configure a new DUT, save/load a project or start the tests.
The parameter grid on the right-hand side of the window shows the
parameters which are related to the selected procedures.
The log list at the bottom of the window shows calibration and test status
messages (regular progress updates as well as warnings and error
messages).
Using the Software
Figure 20. It contains the list of calibration
5
39