Keysight Technologies N5991 Getting Started Manual page 29

Keysight N5991 Test Automation Software Platform Getting Started Guide
When the ValiFrame Station Configuration is launched, the ValiFrame
Configuration Wizard appears as shown in
Figure 13 Station Selection Window (Example for PCIe)
Next, you may optionally assign sounds that would mark the attainment of
different states of the program.
1 End of Sequencer plays the selected sound at the end of a sequence.
2 Connection diagram plays the selected sound every time a connection
diagram pops up.
3 Dialog Prompt plays the selected sound at each dialog prompt.
Select a sound tone from the following options available in the drop-down
options. The option 'None' disables the sound for the respective action.
• Car brake
• Feep Feep
• Ringing
• TaDa
• Tud
Using the Software
Figure 13.
5
29