Iberreader Interface - Keysight Technologies N5991 Getting Started Manual

IBerReader Interface

Keysight N5991 PCIe Test Automation Software Platform User Guide
For some DUTs proprietary tools exist to control the device (e.g. set it to
loopback mode) as well as for reading internal checksum error counters,
burst counters, or other indicators. These indicators make it possible to
determine whether the receiver was able to receive the data properly. The
integration of such proprietary tools into the Test Automation Software
can be achieved with the iBerReader software interface. The interface acts
as a wrapper for such tools and the definition is given in C# .NET.
It contains methods, which will be called by ValiFrame during test
execution to configure the device under test (DUT) and request the
pass/fail information from the DUT.
Additional Tools 6
57