Keysight Technologies N5991 Getting Started Manual page 34

5 Using the Software
34
must enter their address strings in the ValiFrame Instrument Configuration
Window (see Figure 4). The recommended way of doing this is by copying
and pasting instrument addresses as follows:
Click the VISA Addresses field next to an instrument in the Connection
1
Expert.
Copy the address, and highlight the same instrument in the Test
2
Station Connection window.
Paste the address in the Instrument Address text field and click Apply
3
Address.
4 Repeat this procedure for all the instruments being used, except
standard specific applications running on the oscilloscope.
Keysight N5991 Test Automation Software Platform Getting Started Guide