Table of Contents
Advertisement
Configuration
Security
Access Control prohibits unauthorized access to the Ethernet network via the wireless
LAN. It contains a list of mobile clients that can either be granted or denied access to
the Ethernet LAN through the Skyline network.
The Access Control list can hold up to 10o entries.
1.
Click the Enable Access Control box.
Select the Access Control Mode you wish to use.
2.
3.
Enter the MAC address of the wireless LAN adapter installed in the mobile client
in the table. The physical address or MAC address is a 48-bit unique identifier
assigned to each networking device. Enter only the twelve hexadecimal digits
when adding a client to the Access Control list (for example, 0020A6006676).
4.
Click Submit. The client's physical address should now appear in the Access
Control list.
24
Advertisement
Table of Contents
