Windows 2000, Xp - AL Tech Mediagate MG-450HD Manual

Wi-fi net-disk multimedia player

Hide thumbs Also See for Mediagate MG-450HD:

Table of Contents

Enlarged version

1.3.3 Windows 2000, XP

1) After connecting MG-450HD and plug power cable,

Windows itself will install driver automatically. And then,

check the driver installation at Windows [Start > Settings >

Control panel > (switch to classic View on Windows XP) >

system > Hardware > Device manager > Universal Serial

Bus controllers > USB Mass Storage Device ].

2) Check 'My Computer' or 'Explorer', there should be a new

volume. You can copy any data to this volume.

If new volume is not be appeared, check HDD format or not.

W and HDD file system. Windows 2000, XP detect both FAT32

and NTFS file system.

3) After copying data, remove MG-450HD with using

remove icon

at Windows right-down corner. If you

don't follow this procedure, data and MG-450HD may have

damage.

When you see 'Non High-Speed USB Hub Message'

The message will be displayed On windows XP when you plug

MG-450HD into USB 1.1 spec. Host adapter.

Table of Contents