AL Tech Mediagate MG-450HD Manual page 67

2. How to setup each protocol?
① After turn MG-450HD on, press [SETUP] button and go to
[SETUP] page.
1) SAMBA (Basic mode)
Go to [ Setup] => Select [Protocol] => Select [SAMBA].
①
② Go to the 2 page and select [Protocol] icon and press
nd
[ENTER] button then you will get the above page.
② t [SAMBA Server address], select [Auto] or [Manual]. A
- Auto : MG-450HD scans all SAMBA servers automatically
connected in the network group.
- Manual : You can indicate the server address you want to
access.
66