Table of Contents
Advertisement
6) Check 'User cannot change password' and 'Password
never expires'.
7) Move to [Control Panel>Network and Dial-up
Connections], and select Properties of 'Local Area
Connections' by right click of mouse.
If you see two or more 'Local area connections', select one
that you will use for connecting to MG-450HD.
8) Double click 'Internet Protocol (TCP/IP)' that you want to
use on your computer.
9) Check 'Use the following IP address', and write 'IP
address' & 'Subnet mask' that you want to use.
For example,
IP address: 192.168.1.3
Subnet mask: 255.255.255.0
If you have already been 'obtained an IP address
automatically' from DHCP Server or IP Router on your local
area network, you don't need to write specific IP address
absolutely. Use 'Obtain an IP address automatically' or write
IP address & Subnet mask that DHCP Server or IP Router
provide.
33
Advertisement
Table of Contents
