Table of Contents
Advertisement
If you have already been provided dynamic IP address from
DHCP Server or IP Router on your local area network, you don't
need to write static IP address absolutely. Use 'Obtain an IP
address automatically on' or write IP address & Subnet mask
that DHCP Server or IP Router provide.
9) At above number 7) figure, click 'Advanced' Tab. Disable
'Internet Connection Firewall'.
If you use service pack 2, refer to the following figures.
Click 'Settings' at 'Windows Firewall'
Check 'Off' and click 'OK'
6) Set the network configurations of MG-450HD.
You have to connect MG-450HD to TV set for this setup.
See "6.1 Connect Video Cable".
Press [SETUP] of remote control for moving to setup screen.
On that screen, select 'DHCP Support Off' and write IP
address & Subnet mask.
For example,
IP Address: 192.168.1.2
Subnet mask: 255.255.255.0
37
Advertisement
Table of Contents
