Windows 2000, Xp - AL Tech Mediagate MG-35 Manual

1.3.3 Windows 2000, XP

1) After connecting MG-35 and plug power cable,
Windows itself will install driver automatically. And
then, check the driver installation at Windows [Start >
Settings > Control panel > (switch to classic View on
Windows XP) > system > Hardware > Device
manager > Universal Serial Bus controllers > USB
Mass Storage Device ].
2) Check 'My Computer' or 'Explorer', there should be
a new volume. You can copy any data to this volume.
If new volume is not be appeared, check HDD format
or not. W and HDD file system. Windows 2000, XP detect
both FAT32 and NTFS file system.
3) After copying data, remove MG-35 with using
remove icon at Windows right-down corner. If
you don't follow this procedure, data and MG-35 may
have damage.
When you see 'Non High-Speed USB Hub Message'
The message will be displayed On windows XP when
you plug MG-35 into USB 1.1 spec. Host adapter.
16