Table of Contents
Advertisement
④ At the main menu, press [ ] button on
◀
⑥ If you press [FTP] icon, then you will get the above pop-up
that asks you to select a FTP server.
Webpage Name : The nick name of the FTP Server that MG-450HD access to. You can make a nick name as you want.
FTP Address : FTP Server IP address that MG-450HD accesses to.(ex, airlinktek.com )
I D
: FTP Server ID that MG-450HD accesses to.(ex, mediagate450hd)
Password
: FTP Server password that MG-450HD accesses to (ex, 222)
Port
: FTP Server port number that MG-450HD accesses to (ex, 21)
Passive
: In case, the FTP server is located behind a router
☞
the remote.
or firewall, check "v " at [Passive] mode
71
⑤ Then you can get the second main menu page and select
[FTP] icon.
[Note] :
At the first time, there are no server lists, so you need to put a
FTP server address manually.
(FTP server lists can be saved even though you power off/on
the MG-450HD.)
.
Advertisement
Table of Contents
