Windows 2000, Xp - AL Tech Mediagate MG-45 Manual

1.3.3 Windows 2000, XP

1) After connecting the MG-45, plug in the power cable.
Windows itself will install the driver automatically.
Then, check the driver installation at Windows [Start >
Settings > Control panel > (switch to classic View on
Windows XP) > system > Hardware > Device
manager > Universal Serial Bus controllers > USB
Mass Storage Device ].
2) Check 'My Computer' or 'Explorer', there should be
a new volume. You can now copy data to this volume.
a new volume. You can copy any data to this volume.
If a new volume does not appear. Check if the HDD is
formatted or not, and also the HDD file system. Windows
2000 & XP detects both FAT32 and NTFS file system.
3) After copying data, remove the MG-45 by using the
in Windows right-hand corner. If
remove icon
you don't follow this procedure, data loss my result,
and the MG-45 may be damaged.
This message will be displayed On windows XP when you
When you see the 'Non High-Speed USB Hub Message'
plug in the MG-45 into a USB 1.1 spec. Host adapter.
16