Table of Contents
Advertisement
√ Note: When connecting Ad-Hoc Mode, manual setting of IP Address and Subnet mask will be required.
Manual setting of IP address and Subnet mask of wireless adapter and MG-450HD will be required. Disable DHCP and enter "IP
Address" and "Subnet mask". IP address must be different between MG-450HD and wireless adapter, and also subnet mask is
to be the same.
Ex) MG-450HD: IP Address(192.168.10.2) Subnet(255.255.255.0) ==> Wireless adapter: IP Address(192.168.10.3) Subnet
mask (255.255.255.0)
<MG-450HD IP manual setting>
④ Select preferable one out of the scanned wireless stations.
*Wireless station information is displayed.
-SSID: Name of Wireless Station
-Connection Mode: AP Mode (to connect an AP)
: Ad-hoc Mode (to connect wireless adapter)
-Channel: Wireless channel used by wireless station
⑤ Information of wireless station will be displayed. Press [SETUP]
for saving configurations.
<Wireless Adapter IP manual setting
26
Advertisement
Table of Contents
