Table of Contents
Advertisement
④ Server ID :
Set up the ID that the server allows the clients to access.
The default ID is [altechuser] and you can change it as you want.
When you access to the MG-450HD, you should use the same ID you did set up.
⑤ Password :
Set up the password that the server allows the clients to access.
The default PASSWORD is [altech] and you can change it as you want..
⑥ Server Port :
Set up the server port that FTP server is using.
The default port number is [21] and you can change it as you want.
☜
③ Indicate the path of the FTP Sever :
Indicate the path that the FTP Clients can access and download
the contents.
After you set up FTP server on MG-450HD and then you can
access to the MG-450HD and see the files at the indicated
directory.
81
Advertisement
Table of Contents
