[Note] : If you use a IP Router (AP Router), then you need to disable [Firewall] and some ISPs don not allow port number [21], so in this
case, you may use [2121] or [2123], etc.
For more detail of the router, please contact the router company and ask them about [DMZ],[Port-Forwarding], [Irregular FTP port use].
[Note] : Make sure that MG-450HD should be connected by one of wired or wireless connections.
☜
⑦ FTP [ON ]:
After you did set up all configurations, then select [On] at [Use
FTP Server]
☜
⑧ Save the configurations & ready to use :
After you did set up the all configuration and press [Setup]
button on the remote control then MG-450HD is to be a FTP
server function.
☜
⑨ Press [INFO] button just one time on the remote
then you will get this pop-up and remember Wired or Wireless
IP in order to access to MG-450HD by using FTP program on
a PC or other MG-450HD which are using FTP Client..
82