4) FTP
MG-450HD can access a FTP Server and stream the contents from the FTP server and
Go to [Setup] => Select [Protocol] => Select [FTP].
①
Put the FTP server address at [FTP Address].
②
Put the user ID of the FTP server at [FTP ID].
③
Put the user password of the FTP server at [FTP
④
Password].
Put the port number of the FTP server at [FTP Port].
⑤
Select whether you want to use "passive m
⑥
Passive].
Usually, you can select "passive mode" when a firewall (or
Router) is installed in the network.
☜
After you complete [Setup], then press [Setup] button
⑦
for saving the configuration and go to the main menu and select
[LAN] or [Wireless] then MG-450HD will access a FTP server
and stream the contents from the server.
69
ode" at [FTP