Table of Contents
Advertisement
√ Note: In case, wireless icon is not activated or not connected to wireless station.
1. [Waiting or Rebooting] It might take some time to assign IP address from AP in case of AP Mode. So, wait for a while.
Or, reboot AP and MG-450HD together.
2. [Manual Setting of IP address and Subnet mask] In case of AP Mode, disable DHCP support and do manual setting of IP
Address and subnet mask. Each IP address should be different and subnet mask should be the same.
Ex) AP: IP address(192.168.10.1) Subnet mask (255.255.255.0) ==> MG-450HD: IP address(192.168.10.2) Subnet mask(255.255.255.0)
⑥ [WIRELESS] icon is activated. Select the icon, and then the PC
<Check IP address of AP
<Manual Setting of IP address and subnet mask MG-450HD>
27
lists on the network are displayed.
Access to the preferable PC you want.
Advertisement
Table of Contents
