Table of Contents
Advertisement
6) Set the network configurations of MG-450HD.
You have to connect MG-450HD to TV set for this setup.
See "6.1 Connect Video Cable".
Press [SETUP] of remote control for moving to setup screen.
On that screen, select 'DHCP Support Off' and write IP
address & Subnet mask.
For example,
IP Address: 192.168.1.2
Subnet mask: 255.255.255.0
After writing, press [SETUP] again for saving configurations.
If you have already been provided dynamic IP address
from DHCP Server or IP Router on your local area
network, you don't need to write static IP address
absolutely. Use 'DHCP on' or write IP address & Subnet
mask that DHCP Server or IP Router provide.
Check 'IP address obtained automatically'
When you use 'DHCP On', you can see the IP address
on information screen with pressing [INFO] button.
`
<MG-450HD's IP Address>
34
Advertisement
Table of Contents
