Pip Menu - Digital Projection Titan 800 3D series User Manual

Digital Projection
Titan 800 3D series

PIP menu

Two images can be combined, in three different ways using this feature. The PIP menu is available
only when Setup > System > Configuration
Option
•
Select , , or mode from the drop-down list.
PIP PAP POP
Input
•
Select an from the drop-down list. The inputs are divided into two groups – the main
Input
image must be from one group, and the sub-image must be from the other group.
•
Group A: CVBS 1, CVBS 2 ,
•
Group B: COMPONENT, VGA
Size
•
Select a size for the sub-image from the drop-down list.
Position
•
Select one of the preset positions for the sub-image from the drop-down list.
Custom Position
•
If you have chosen Custom from the Position drop-down list, then you can use the sliders to
position the image manually.
Rev A June 2012
is set to PIP .
S-VIDEO and 3G-SDI
, DVI , HDMI and DVI-A
A TOUR OF THE MENUS
PIP: Picture In Picture
PAP: Picture And Picture
POP: Picture Opposite Picture
Operating Guide
Notes
Main Menu
PIP
This menu is available only when
Setup > System > Configuration
set to .
PIP
, and are NOT
PIP PAP POP
possible when is set to
Input Test
Pattern .
In these examples, the flower is the
main image, and the window is the
sub-image, shown at the
Medium
size setting.
The two images MUST be from
different Input groups .
The Position settings apply ONLY
to mode. PAP and POP are
PIP
always as shown in these examples.
Page Op_19
is