Dc Power Connection; Grounding; Connecting To External Products; Wiring Procedures - YOKOGAWA ADMAG TI Series User Manual

Wiring Procedure
1. Check the product's power is off, then remove the
terminal cover (transparent).
2. Wire the power supply cable and the functional
grounding cable to the power supply terminals.
3. Install the terminal cover.
Integral type or AXG4A remote transmitter
M4 Screw Type for EtherNet/IP communication type
Figure 4.4.1 Power Cable Wiring

4.4.2 DC Power Connection

(Please read the descriptions on IM 01E22A01-01EN.)

4.4.3 Grounding

(Please read the descriptions on IM 01E22A01-01EN.)

4.4.4 Connecting to External Products

(Please read the descriptions on IM 01E22A01-01EN.)
Functional grounding cable
Power supply
cable
<4. Wiring>

4.4.5 Wiring Procedures

(1) For Integral Flowmeter and AXG4A Remote
Transmitter
(Please read the descriptions on IM 01E22A01-01EN.)
(2) Terminal Configuration
(Integral Flowmeter and AXG4A
Transmitter)
Protective Protective
Grounding Terminal Grounding Terminal
Integral Flowmeter
Integral Type/AXG4A Remote Transmitter
When the cover is removed, the connection terminals
will be visible.
The description of the terminal symbols is shown in the
following Figure.
<To be wired to Power Supply and PORTs>
M4 Screw Type for EtherNet/IP communication
Communication and I/O code: P0
Module Status
10 100Mbps
/
Network Status
PORT1 Link
PORT2 PORT1
PORT2 Link
PORT2 PORT1
10 100Mbps
/
Terminal Symbol
Shorting Screw
(Need to be fixed for normal operation)
Functional Grounding
N/-
Power Supply
L/+
PORT1
Ethernet port (RJ-45, 2 ports)
PORT2
Protective Grounding
(Inside and outside of the terminal box)
Figure 4.4.2 T erminal Configuration (Integral Flowmeter and
AXG4A Remote Transmitter)
AXG4A Remote Transmitter
F0402.ai
Activity
/
Activity
/
Description
F0403.ai
IM 01E21A01-03EN-A
7