Introduction; For Safe Use Of Product - YOKOGAWA ADMAG TI Series User Manual

1.

Introduction

This manual provides the basic guidelines for installation,
wiring procedures and basic operation of ADMAG TI (Total
Insight) Series AXG magnetic flowmeters with EtherNet/IP
protocol.
For the items which are not covered in this manual,
read the applicable user's manuals and general
specifications as listed in Table 1.1. These documents can
be downloaded from the YOKOGAWA website. To ensure
correct use of the product, read these manuals thoroughly
and fully understand how to operate the product before
operating it. For method of checking the model and
specifications, read Chapter 2 and general specifications
as listed in Table 1.1.
Website address: http://www.yokogawa.com/fld/doc/
These manuals can be downloaded from the website
of YOKOGAWA or purchased from the YOKOGAWA
representatives.
Table 1.1 M anual and General Specifications List
Model Document Title
ADMAG TI Series
AXG###, AXG4A Magnetic
Flowmeter
EtherNet/IP communication type
Read Me First
ADMAG TI Series
AXG Magnetic Flowmeter
Installation Manual
ADMAG TI Series
AXG Magnetic Flowmeter
EtherNet/IP Communication Type
Installation Manual
AXG###
Difference to IM 01E22A01-01EN
AXG4A
ADMAG TI Series
AXG Magnetic Flowmeter
Maintenance Manual
ADMAG TI Series
AXG Magnetic Flowmeter
General Specification
ADMAG TI Series
AXG Magnetic Flowmeter
EtherNet/IP Communication Type
ADMAG TI Series
AXG Magnetic Flowmeter
EtherNet/IP Communication Type
NOTE
When describing the model name like AXG### in this
manual, "###" means any of the following.
002, 005, 010, 015, 025, 040, 050, 080, 100, 150, 200
Precautions Related to the Protection,
Safety, and Alteration of the Product
(Please read the descriptions on IM 01E22A01-01EN.)
Regarding This User's Manual
(Please read the descriptions on IM 01E22A01-01EN.)
1st Edition: Mar. 2020 (KP)
All Rights Reserved, Copyright © 2020, Yokogawa Electric Corporation
(Please read the descriptions on IM 01E22A01-01EN,
and add the following description.)
• "EtherNet/IP", "CIP" and "ODVA" are registered
1.1
System in which this product is incorporated, be sure to
follow the instructions and precautions on safety that is
stated in this manual whenever you handle the product.
Take special note that if you handle the product in a
manner that violated these instructions, the protection
functionality of the product may be damaged or impaired.
In such cases, YOKOGAWA shall not be liable for any
indirect or consequential loss incurred by either using or
not being able to use the Product.
(1) General
Document No.
• This product conforms to IEC safety class I (with
IM 01E21A21-
04EN-A
IM 01E22A01-01EN
• This product is an EN61326-1 (EMC standard), Class A (for
IM 01E21A01-03EN-A
(this manual)
• This product conforms to the standard specifications
• This product is complied with IP66 and IP67 in the
IM 01E22A01-02EN
GS 01E22A01-01EN
• This product is designed for indoor and outdoor use.
IM 01E21A02-06EN
This product is a Class A product in the EN61326-
GS 01E21F02-02EN-A
1(EMC standard). Operation of this product in a
residential area may cause radio interference, in
which case the user is required to take appropriate
measures to correct the interference.
The minimum ambient temperature is limited by the
minimum fluid temperature of the sensor (the lining).
For more information, read the applicable general
specifications as listed in Table 1.1. The flowmeter
may be used in an ambient humidity where the relative
humidity ranges from 0 to 100%. However, avoid long-
term continuous operation at relative humidity above
95%.
<1. Introduction>
Trademarks:
trademark of ODVA Inc.

For Safe Use of Product

Protective grounding terminal), Installation Category
(Overvoltage Category) II, No Measurement Category
("O"(Other)), Micro Pollution degree 2, Macro
Pollution degree 4, Altitude at installation Site Max.
2000 m above sea level.
use in commercial, industrial, or business environments).
of CIP for EtherNet/IP communication.
EN60529. YOKOGAWA assumes no liability for the
customer's failure to comply with these requirements.
CAUTION
IMPORTANT
1
IM 01E21A01-03EN-A