4-24
C
4: M
HAPTER
ANAGING
Reset
This page is used to reset the switch. Resetting the
switch simulates powering off and powering on the
switch. You may want to do this if you want to:
Apply any changes made to the switch's IP, SLIP
and default router information.
Remove all of the non-permanent addresses from
the switch database.
Reset the switch's statistics counters.
CAUTION: Performing a reset may cause some of
the data being transmitted over the network to be
lost.
During a reset, the web browser is unable to
communicate with the switch. After the reset,
communication is restored. The reset process takes
about 10 seconds.
Y
S
U
W
OUR
WITCH
SING THE
EB
I
NTERFACE
Software Upgrade
This page is used to upgrade the management
software on the switch with a new agent software
upgrade, as shown in
new software upgrade into the appropriate directory
on the TFTP server that the server has been configured
to look in. For information on how to use your TFTP
server, refer to the documentation that accompanies
it.
Figure 4-15 Software Upgrade Page
The page shows the status of the previous software
upgrade. To refresh the page (to update the upgrade
status), click Refresh.
Figure
4-15. You must copy the