Before You Start; Hub Connections; Workstation Connections - 3Com OfficeConnect 140M User Manual

2-4 C 2: C
HAPTER REATING

Before You Start

Your OfficeConnect switch comes with:
One power adapter for use with your
OfficeConnect switch
A warranty registration card for you to fill out and
return
Four rubber feet
Four stacking clips
One 3.5" disk featuring:
A serial web utility
Online help for the web interface
A product range sheet
A quick reference guide
This guide

Hub Connections

To connect OfficeConnect hubs to your switch, you
need one suitable TP cable for each hub.
Y N
OUR ETWORK

Workstation Connections

To connect workstations or other equipment (such as
servers) directly to your switch ports, you need:
One 10BASE-T or 100BASE-TX adapter card or
1
suitable connection for each workstation or piece of
equipment (your equipment may already have an
appropriate connection). 3Com produce a range of
easy to install network adapters, which can provide
your workstation with a 10BASE-T or 100BASE-TX
connection.
2 One suitable TP cable for each workstation or piece of
equipment.
In order to comply with the 10BASE-T standard, ports
designed for workstation connections have been
marked with the graphical symbol 'x'. This denotes a
crossover in the port's internal wiring, for example
1x, 2x, 3x...