Solving Problems With The Serial Web Utility - 3Com OfficeConnect 140M User Manual

C-4 A C: S
PPENDIX ERIAL
4 The connection is successful if the web interface's
password panel is displayed. You are now ready to
manage the switch; refer to

Solving Problems With the Serial Web Utility

If you are unable to connect to the switch's web
interface, it may be that:
The unit is not powered on.
You are not using a proper null modem cable, refer
to "Examples of Null Modem Cables You Can Use"
on page A-3.
The following settings are different on your switch
and management station:
Flow control.
Speed (baud rate).
The switch has automatically configured its
communication speed, but you have subsequently
changed the speed configured on your
management station (the device only automatically
configures the speed the first time it connects).
You have selected the wrong COM port on your
management station.
W U
EB TILITY
Chapter 4.
To change some of the settings for the management
station, use the Advanced Configuration Parameters
dialog box. To display this, select the Serial Web Setup
program item in the Serial Web program group.